Varimixer W20 F Instruções de Operação descarregar pdf (Página 4)

(24) The planetary head is taken off in the following way:

a) The top cover of the mixer (1), the attachment engagement hub (3), the special V-belt (7), and the control

box (6) are removed.

b) The plastic ring (26) can be taken off by knocking it gently on the front edge, and then press a screwdriver in

between the plastic ring and the metal plate at the top of the plastic ring.

c) Take off the rubber ring (27).

d) The stainless headcap (28) can now be taken off by knocking it gently on the front edge with a plastic ham-

mer, turn the planetary head 180

, and knock again gently on the front edge.

e) If only the lower part of the planetary head is to be repaired, the planetary head can be separated by remo-

ving the 3 bolts (29).

f) Take off the grease nipple and washer (30), and pull off the upper half of the pulley set (31) with an extrac-

tor.

g) Take off the movable part (32) of the pulley set.

h) Take off the 4 screws (33).

i) The spring (34) is taken off in the following way: The nuts (11) and (12) are removed. The lower fork (15),

the toothed rack (35) and the spring (34) will come up too when the nut (12) is removed. If the toothed rack

(35) is to be exchanged, this can be done now when the lower fork (15) is free. Take out the bolt (38), and

the toothed rack can be exchanged.

j) The counter nut and the pointed screw (36) are removed, whereafter the speed selector lever (8) can be ta-

ken out.

k) Take off the pin bolt (37) by loosening the counter nut.

l) By loosening and taking out the 4 bolts (25), the planetary head can be lowered.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Varimixer W20 F Instruções de Operação Página 4