Varimixer W20 F Instruções de Operação descarregar pdf (Página 3)

(1) Remove the top cover of the mixer (1) and the plastic cover (43) by removing the 2 screws (2).

(3) The attachment engagement hub is taken out by removing the plastic cover (4), and the 4 bolts (5).

(6) The control box is taken off by removing the 2 screws (55).

(7) The special V-belt is exchanged in the following way:

a) Remove the top cover of the mixer (1) and the plastic cover (43).

b) Press the speed selector lever (8) back towards the back of the mixer so that the special V-belt is loosened,

and take off the special V-belt.

c) The special V-belt is mounted by first placing it on the rear pulley set (9) (the motor pulley set) and open the

pulleys by pulling the special V-belt.

d) Turn the speed selector lever (8) back towards the back of the mixer (high speed) and mount the special

V-belt on the front pulley set (10).

e) Adjust the speed, see page 5.

(9) The motor pulley set is taken off in the following way:

a) Remove the top cover of the mixer (1), the plastic cover (43) and the special V-belt (7).

b) The motor pulley set can now be taken off by loosening the 2 screws (40).

The upper half of the pulley set can be taken off by removing the circlip (41).

(17) The legs of the mixer are taken off by removing the screws (18).

(19) The bottom plate is taken off by removing the legs of the mixer (17)

and the 2 nuts (20).

(21) Relay and thermal overload relay are taken out in the following way:

a) Remove the top cover of the mixer (1), the plastic cover (43), the special V-belt (7), and the control box (6).

b) Loosen the screws (22) and take out the relay fittings. The relay can be clicked off the rail and exchanged.

Before relay and thermal overload relay are taken out, the mixer must for safety reasons be discon-

nected on the main switch, or the connecting cable disconnected.

The indicator (23) on the side of the

thermal overload relay, is adjusted to

the rated current of the motor + 10%.

(42) The motor is taken out in the following way:

a) The voltage to the mixer is switched off or the connecting cable disconnected.

b) Remove the top cover of the mixer (1), the plastic cover (43), the special V-belt (7), and the motor pulley set (9).

c) The motor cable is removed from the connecting box (44) of the motor.

d) Put down the mixer on its back.

e) Take off the legs of the mixer (17) and the bottom plate (19).

f) By removing the 4 bolts (16) the motor can be pulled out backwards.

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

Varimixer W20 F Instruções de Operação Página 3