Varimixer W30(A) Manual do Utilizador Página 1

SPARE PART AND OPERATION MANUALFOOD MIXERModels W30(A), W40(A), W40P, W60(A) and W60P

ADJUSTMENT OF BOWL HEIGHT:The distance (X) is measured from the bottom side of the bayonet hole to the surface on the bowl arms on which the bowl rest

8

9PN 27-172PN 140-173PN 81-173

MACHINE COLUMN1. Bowl Lift Microswitch See Figure See Figure See Figure See Figure See Figure2. Mounting Screws

11

BOWL ARMS PART NUMBERBowl Arm Left (Pre 1993)Bowl Arm ShaftShock AbsorberCrank ArmBowl Arm Right Bowl Arm Right

13

14PLANETARY HEADPART NUMBER per MODEL NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO. 0

15

16TRANSMISSIONPART NUMBER per MODEL NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO. 0

Caution -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the u

17

18SPEED LEVER ASSEMBLYPART NUMBER per MODEL NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO. 0

19

20SINGLE SPEED TRANSMISSION PART NUMBERW40PIW60PIDESCRIPTIONFIG. NO. 0

2135 35A34 34A33 33A

22ATTACHMENT DRIVE GEARBOX PART NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO.

23

24ELECTRICAL PANEL 1985 - JUNE 1998 PART NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO.

2519

ELECTRICAL PANEL JULY 1998 - PRESENT PART NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO.

Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one year from the date o

27

28BOWL SCREEN 1993 - PRESENT PART NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO.

29

BOWL SCRAPER 1985-2000 (SCREW TYPE)30

31

KEYHOLE BOWL SCRAPER 2000-32

33

34ATTACHMENTS AND OPTIONAL PRODUCTS PART NUMBERW60PW30 (A)W40 (A) W40PW60 (A)DESCRIPTIONFIG. NO.

351985 - June 1998 1 Phase

361985 - June 1998 3 Phase

TABLE OF CONTENTSInstallation Instructions...2 Opera

371998 - Present 1 Phase

381998 - Present 3 Phase

5489 Campus Drive Shreveport LA 71129 (800) 222-1138

Read this page entirely BEFORE beginning installation.VARIMIXER INSTALLATION INSTRUCTIONSThe mixer must be mounted with the rubber feet, which neutral

OPERATION OF THE MIXER:A) Open the bowl screen and place the bowl in the bowl arms. Note: The bowl arms must be in lowest position and the b

Maintenance and Lubrication:The variable speed pulleys must be lubricated regularly, i.e. a lubrication interval of approx. 60 hours of operation.Lubr

Belt Adjustments and Removal5To remove V-belts or tooth belt:1. Remove the 4 screws (T) from the control panel.2. Remove the front control (U) from mi

6